

What is Network Penetration Testing for Manufacturers?
Network penetration testing for a manufacturer is an authorized, controlled attempt to break in the way a real attacker would, including across the boundary between the office and the shop floor. For defense suppliers under DFARS 252.204-7012 and CMMC, it proves the controls in your System Security Plan actually hold up.
By James Denney, Sales & Marketing Director | Technically reviewed by the AllTech security engineering team | Updated October 15, 2026
This guide is general information, not legal advice. Confirm your obligations with your attorney.
A risk assessment documents what could go wrong on paper. A penetration test shows it in practice by trying to break in the way a real attacker would.
For manufacturers under DFARS 252.204-7012 and CMMC, it proves the controls in your System Security Plan actually hold up.
Primes and contracting officers increasingly expect it as evidence of a mature security program.
It tests the paths an attacker would use, including machine controllers, MES platforms and remote vendor access on the same network as Controlled Unclassified Information.
Overview
Network penetration testing is a controlled, authorized attempt to break into your systems the way a real attacker would. It does not just check for known weaknesses, it actively tries to exploit them to see how far an intruder could get. Where a cybersecurity risk assessment documents what could go wrong on paper, a penetration test shows it in practice.
For manufacturers working under DFARS 252.204-7012 and CMMC, this matters for two reasons. First, it validates that the controls documented in your System Security Plan hold up, rather than existing only on paper. Second, it is increasingly what primes and contracting officers expect as evidence of a mature security program, especially once machine controllers, MES platforms, and remote vendor access sit on the same network as the systems handling Controlled Unclassified Information.
Exploiting public facing applications was the most common way into manufacturers in 2025, at 32% of IBM X-Force cases, which is exactly what an external penetration test checks.
Benefits of Penetration Testing for Manufacturers
Proves your controls work. It moves beyond documentation to real world validation of your defenses.
Strengthens your CMMC position. It supports the security assessment requirements and gives assessors and primes concrete evidence, not just policy documents.
Finds the paths an attacker would use. That includes the ones that connect office IT to the shop floor.
Tests vendor and remote access, not just your own network. This is a common blind spot when outside technicians service equipment remotely.
Ranks the fix list by real exploitability. You see what an attacker could actually do with each gap, not a generic severity score.

How AllTech Delivers
AllTech IT Solutions runs network penetration testing for manufacturers across Alabama, the Florida Panhandle, and South Georgia, with particular attention to the connections between office IT and shop floor OT, the path most likely to matter in a real intrusion.
Testing is scoped carefully around live production equipment, and because AllTech also provides managed security services, findings feed directly into remediation, so a test report does not just sit on a shelf. The work is delivered from our Birmingham and Dothan offices.
Key Areas Addressed
Network Penetration Testing
Authorized, real world testing of your network, including the office to shop floor boundary.
Cybersecurity Risk Assessment
The documentation side gap analysis that pairs with real world validation.
Cybersecurity as a Service
Ongoing monitoring and managed defenses that close the gaps a test surfaces.
Advanced Cyber Protections
Layered defenses for the higher risk findings a manufacturing test tends to surface.
Incident Response Handbook
A plan for the day a real intrusion follows the same path a test found.
Virtual Technology Advisor
Strategic guidance that turns test findings into a realistic, budgeted remediation plan.
The AllTech Approach to Penetration Testing for Manufacturers
Scope around production. Every test is planned around live equipment so testing does not risk downtime.
Test the boundary. The office to shop floor boundary and remote vendor access are tested, not just the office network.
Rank by exploitability. Findings are ordered by what an attacker could actually do, not by generic severity.
Move straight into remediation. Managed security services close the gaps without a handoff to a second vendor.
Keep the evidence current. Annual testing, plus testing after major network changes, keeps your evidence ready for prime contractor reviews.
Related Services
Manufacturing and Engineering IT
IT support built around production uptime, ERP, and network segmentation.
Data Backup and Disaster Recovery
Tested recovery so a successful intrusion does not become extended downtime.
Managed IT Services
Full managed IT support that keeps remediated systems patched and current.
About the author
James Denney is the Sales & Marketing Director at AllTech IT Solutions. He has 25+ years in IT, including nearly two decades running IT and operations for wholesale distributors and six years as an AllTech engineer. Every guide is technically reviewed by the AllTech security engineering team.
Frequently Asked Questions
What is network penetration testing, and why do manufacturers need it?
A penetration test is an authorized, simulated attack on your network carried out by security professionals using the same techniques real attackers use: probing for weaknesses, then attempting to exploit them to see how far they can get.
Manufacturers need it because a modern facility is not just an office network. Office IT is connected, directly or indirectly, to production equipment, ERP systems, and often outside vendor access, and a test is the clearest way to see how those connections behave under attack rather than assuming the diagram in your documentation matches reality. For the general version of this topic, see What is Network Penetration Testing.
Does CMMC require penetration testing?
CMMC Level 2 has no single control labeled penetration test. What it does require, through the NIST SP 800-171 risk assessment and security assessment requirements, is regular vulnerability scanning and periodic assessment of your security controls to confirm they work as intended.
In practice, a penetration test is the most credible way to meet that expectation, and CMMC Level 3, built on NIST SP 800-172, calls for penetration testing explicitly. Many manufacturers run one regardless, because it is the clearest evidence a prime contractor can see that your controls hold up.
What is the difference between a penetration test and a cybersecurity risk assessment?
A risk assessment is broad and administrative: it reviews your policies, configurations, access controls, and documentation to build a complete picture of where you stand against a framework like NIST SP 800-171. A penetration test is narrow and adversarial: it actively tries to break into specific systems the way an attacker would.
The two fit together. A risk assessment might note that remote vendor access to a CNC controller lacks multifactor authentication, and the penetration test shows whether that gap can actually be exploited and how far it lets someone go.
What is the difference between a vulnerability scan and a penetration test?
A vulnerability scan is automated. Software checks your systems against a database of known weaknesses and produces a list, usually within hours. It is fast, inexpensive, and expected regularly under NIST SP 800-171, but it does not tell you whether a listed weakness can be exploited in your environment.
A penetration test is manual and human led, and it goes further: a tester chains weaknesses together, tries to move from one system to another, and shows real impact. It is the difference between noting that a door has a weak lock and showing that someone walked through it and reached the server room.
Does it test shop floor and OT systems, or just office IT?
A manufacturing aware test scopes in the connections between office IT and the shop floor, but testers generally do not run aggressive exploitation directly against live PLCs or CNC controllers, since that risks disrupting production. Instead they test whether an attacker who compromises the office network could reach OT systems, and whether network segmentation and remote vendor access hold.
That is usually the most valuable part of the test for a manufacturer, because it is the path a real intrusion would take.
What happens during a penetration test?
Testing generally moves through four stages: reconnaissance to map your network and identify targets, scanning to find potential weaknesses, exploitation to attempt to use those weaknesses to gain access, and post exploitation to see how far that access could go into other systems, data, and network segments.
Scope and rules of engagement are agreed in advance, so nothing happens that could take down production or a critical system without your sign off.
How long does a network penetration test take?
For a shop with 15 to 100 employees and 25 to 250 endpoints, active testing usually runs one to two weeks, plus time beforehand for scoping and rules of engagement and time afterward for the written report.
A facility with multiple sites or a more complex OT environment takes longer.
How much does network penetration testing cost?
Cost depends on scope: how many systems and network segments are included, whether both external and internal testing are covered, and whether the office to shop floor boundary is being tested. It is typically priced as its own fixed scope project, separate from any risk assessment or ongoing managed security work.
AllTech scopes and prices a test after a short conversation about your environment and contract obligations.
What happens if we skip it and a prime contractor or assessor asks for proof?
Without a recent test, you have documentation but no independent evidence that your controls work. That is a weaker position in a flow down review, and it can slow or stall a bid if a prime asks for validated security testing as part of due diligence.
It is also an operational risk in its own right. Untested controls fail silently, and the first time you find out is usually during a real incident, not a scheduled review.
How often should manufacturers run a penetration test?
Annually is the general baseline, plus any time you make a significant network change: a new production line, a new remote access setup for a vendor, a new facility, or a material change to your DoD contract scope.
Vulnerability scanning should run more often between full tests, since it is faster and catches newly disclosed weaknesses as they appear.
How do we choose the right partner for penetration testing?
Look for testers who understand manufacturing environments, who are comfortable scoping around live production equipment so testing does not risk downtime, and who can tie the results to DFARS and CMMC expectations.
Also ask how findings connect to remediation. A report full of technical findings is only useful if someone can turn it into a fix list you can act on and, ideally, help carry it out.
