Is Your Synology NAS a Ransomware Target Right Now?
Yes, if it runs outdated software. On November 18, 2026, the Cybersecurity and Infrastructure Security Agency (CISA) confirmed attackers are using a critical flaw in Synology network attached storage (NAS) devices. Synology had already warned that ransomware is locking files on NAS boxes that missed updates. Update yours this week and keep its login page off the open internet.
Key takeaways
CISA added the Synology flaw, CVE-2024-10441, to its list of vulnerabilities with evidence of active exploitation on November 18, 2026.
Synology rated it 9.8 out of 10 and published the fix in an advisory first released November 5, 2024.
A NAS is not a backup unless a separate copy exists that the NAS cannot change.
What did CISA announce?
CISA added four flaws to its Known Exploited Vulnerabilities catalog, including the Synology DiskStation Manager (DSM) flaw tracked as CVE-2024-10441. CISA said in its November 18 alert that flaws like these are a frequent attack vector and encouraged all organizations, not only federal agencies, to prioritize fixing them.
The Synology security advisory rates the flaw 9.8 out of 10, its Critical level, and says it allows remote attackers to run their own code on the device. In plain terms, someone who can reach the NAS over the internet may take it over without a password.
How is ransomware hitting these devices?
Attackers are going after NAS devices that are reachable from the internet and still run old software. BleepingComputer reported on November 2, 2026 that Synology urged customers to update DSM right away after a wave of ransomware attacks.
Victims found their files renamed with a .L0CK3D ending and a ransom note named read-me3.txt. According to The Hacker News, Synology did not name the exact flaw but pointed customers to the same November 2024 advisory. CISA does not say who is behind the exploitation it confirmed.
Example (invented to illustrate): a 40 person engineering firm in Hoover keeps project files on a NAS that a former contractor opened to the internet years ago. One Monday every drawing ends in .L0CK3D, and the only backup lived on the same NAS.
Which DSM versions are fixed?
Check the version in DSM under Control Panel, then Info Center. The Synology advisory lists these minimum fixed builds for the critical flaw:
If your NAS runs | Update to at least |
DSM 7.2.2 | 7.2.2-72806-1 |
DSM 7.2.1 | 7.2.1-69057-6 |
DSM 7.2 | 7.2-64570-4 |
DSM 7.1 | 7.1.1-42962-7 |
These are minimums. Install the newest version your model supports.
Who is at risk?
Any office with a NAS that has not been updated since late 2024, especially one whose login page can be reached from the internet.
If that NAS also holds your only backups, one infection takes out the files and the way back together. Our data backup and disaster recovery guide explains what a recoverable setup looks like.
What should you do this week?
Find every NAS, including old units in closets and branch offices.
Check the DSM version. Compare it to the table above and install the latest update your model supports.
Turn on automatic updates, as Synology recommends.
Close the front door. Block internet access to the DSM login page and use secure remote access instead of an open port.
Check your backups. Keep at least one copy off the NAS that the NAS cannot overwrite, and test a restore.
Report anything suspicious. If you see .L0CK3D files or a read-me3.txt note, unplug the NAS from the network and report it to the FBI Internet Crime Complaint Center (IC3) at ic3.gov.
Not sure what else in your office is exposed to the internet? A cybersecurity risk assessment maps it. If something is already encrypted, an incident response plan tells your team who does what first.
Frequently asked questions
Should we pay the ransom if our NAS gets encrypted?
Talk to your IT provider, your cyber insurance carrier and law enforcement before paying anything. Payment does not guarantee working files, and it marks you as a business that pays. A clean, tested backup stored off the NAS is what turns a ransom demand into an inconvenience.
Our NAS is too old to get updates. What now?
Plan to replace it. A device that no longer receives security updates stays open to every flaw found after its last update. Until the replacement arrives, cut its internet access completely, move critical files and backups somewhere supported, and limit which accounts can reach it.
How do we know a patch actually got installed?
Someone has to check, not assume. Monitoring catches what people miss: across AllTech clients, 51% of support tickets were opened by monitoring before anyone called. Whoever manages your IT should be able to show you, in writing, the current DSM version and last update date for every NAS you own.
About AllTech IT Solutions
AllTech IT Solutions is a managed service provider with offices in Birmingham (Hoover) and Dothan, Alabama. Founded in 2004, we run IT and cybersecurity for businesses with 15 to 100 employees across Alabama, the Florida Panhandle and South Georgia. Our backups pair an on site appliance with an immutable cloud copy that attackers cannot change. See our results and awards or call (205) 290-0215.
Want a second set of eyes on your NAS and backups? Call us at 205-290-0215 for a short, free conversation, or reach us through our contact page.
Facts checked November 19, 2026. This story is still developing.


Comments